well my indicators arnt working and are staying on constant somebody's mentioned check earth leads? what do they look like im presuming green but cant find em moved loom about ect no luck checked flasher re-lay and working fine?
Your earth wires are they are Black mate.front and back will be connected together,by that i mean if you follow the black wires from the 2 front indicators you will see the 2 black wires go into one connector and ditto for the rear there will be a secondary colour for the power circuit to each indicator,take all the earths apart clean the bullets with wire wool or similar
Has this just happened or have you done some work on it ? Correct bulbs fitted ? They go off if you take the flasher relay out ?
First things first get a manual so you know what you're looking at / for. If the lights are on solid it means you're getting constant voltage to them same as if you wired them direct to + and - on the battery. Are there any other symptoms, problems with anything else that you're experiencing?
Just fitted a tre to it - if I unplug that still the same normal bulbs non led when I flash main beam indicators go dull = short?
