When I remove the piston cyclder (that's what I see) I then just see the piston and the crankshaft (runing throw one side of the bike to the drive belt)
You don't remove the piston mate. Think you've got things mixed up a tad take off the plastic tomorrow and show me a pic
this is what I see when I remove the plastic caseing,this diagram from ym service manual might help better. http://s1284.photobucket.com/user/nathan941/media/Untitled5764_zpsdfabb085.png.html
Ok pal had a look into it sorry didnt clock on it was a 2stroke! ignore this: http://www.scooterunderground.ca/knowledge/manuals/documents/JetEuro50_Service_manual.pdf This from http://wiki.answers.com Unless you mean the power valve?
That's the badger,that's the valve that's seezed.now,I'm asumeing that right above the engine case,as that's were both fuel line and carb's go into the engine. Yep,I know where that bit is,Thank you Woody,big help.
Yep,that's what's broken,£30 ,used,and the guy at the shop wanted £300 to fix my bike XD,cheers Woody,you've helped me learn alot.
Yeah,bealive it or not earler I thought that was the valve and tride takeing the bolts off,but I choudn't get them undone,not enouthe grip, I'll try most of tomorrow spraying them with lubraicant to get them unstuck,then if it runs I'll be able to sell it and get my test done.
Got the valve off today..but it's not sizeed...gently pressed it with a screw driver all 6 flaps opened fine,is there any toher valvs that might be the problem,oil is diffantly going into the engine..but the engine dosn't apper to be geting fuel ( the exhaust is off,woud that not be helping?) there's no fuel ontop of the sparkplug either...
There's fuel going into the fuel pump,not sure if it's going into the carb thought. EDIT:There is fuel going into the carb as it's all over my hands XD
It's not sparking on my frame,but even when the bike was working it never sparked on my frame. Bu there's no smell of petrol on the spark plug or in the cylinder either. Dumb qouestion but will haveing the exhaust off make a diffrence in rather or not the engine will start?
Okay,it's sparking but there's no fuel geting into the engine so,on sunday I'll disasemble the carb abd clean it, girl friend is down so the bike get's neglected for awhile.
Tock the carbs apart today,cleand them up real good,all the jet's are unblocked and there is fuel going into the carb's but that's as far as it goses. There's a spark from the plug,I even try squirting fuel directley into the engine and then tride to start,nothing. Any further advice you can offer me?
If your getting fuel and spark then it can really only be electrics, what actually happens when you try to start it? Kickstart and electric start?
I get a spark,but there's no fuel going into the engine at all. The engine turns over and trys but there's nothing there to start it.