your joking ? your painting the engine in the kitchen ? come on smudge give the kitchen a break FFS....the good news is if you put as much paint on it as you did with the bodywork ,that oil leak will get clog up and no more leaks ...simple
I meant I painted in kitchen so a little oil isn't going to hurt may as well give engine full checkup whilst I play waiting game Sent from my C6903 using Tapatalk
Way I see it no harm in dropping engine degrease it and check any other leaks or seals going so at least I shouldn't need to touch the engine again Sent from my C6903 using Tapatalk
Does the o ring looked damaged or deformed? May as well change it anyway while its apart. Just be careful not to get any of that shit on the cases in there. In future may be an idea to clean the area first. Whats the hose on the right btw that looks like its been rubbing?
Pipe is for the overflow resovior and it's just gunk on it the seal looks perfect just grit on it going to give it a good degrease and clean if it stops then good if not I'll replace Sent from my C6903 using Tapatalk
If that water pump is secured via the hole where you've snapped a bolt there's your problem smudge, it won't be holding onto those cases proper hence the leak. Should of cleaned all that shit off before you removed it too fella, looks like your going to end up with a pile of crap falling in there.
That bolt is just a bleed bolt to bleed the coolant That was before I cleaned it Sent from my C6903 using Tapatalk
No nipple but I think some coolant splashed in my brew as been throwing up for past 10 mins Sent from my C6903 using Tapatalk
Nice shiny bolts cost zero pence thanks to some guy in the 14th shop I visited Sent from my C6903 using Tapatalk
