Since I changed my front indicators into led ones, there all flashing double time. The rears are leds also but worked fine before I changed the fronts. I've seen the flasher relays on ebay, do I just find the relay on my bike and put one of these in? or do I have to wire it in?
If you're going to LED's you'll either need an LED Relay, or if you want to use your stock relay you'll need resistors. With 'Cat, I needed both the relay and resistors on the rear to slow the flash rate down to an acceptable level.
now need to decide if the relay is 2 or 3 pin, I'd look but the bikes at work, think its under ther rear seat. will have to order it monday.
