Hey all, I was looking for some advice on how to fix/mod my Scala rider. To cut a long story short, the speakers that come with the set are rubbish and a common mod is to cut them off and solder in a headphones socket. The wires are braided but also coated in some clear coat stuff which makes it a pain to solder - i've tried this a few times and its not having it so I figured it would be a lot simpler to take it apart and just solder new wires directly onto the board. Heres what it all looks like; My issue is I don't know what the "AN-" means, and also unsure what to replace the wiring with. I just want some short wiring to a headphone socket lol. Any wiring I've looked at just has L, R and ground, this thing has 6 wires :S Any help/advice much appreciated
The wire is easy to solder, just use a lighter to burn the varnish off and use a low heat soldering iron, tin them with some good solder (not lead free crap) .
Antenna cables. http://www.advrider.com/forums/show...cb84e35f6af6940232c1&p=19428906&postcount=143 If you dont use the FM radio dont connect them And google motherfucker, GOOGLE!
Of the 5 or 6 threads I found, that was one I didn't see, and the most fucking useful. Awesome. Cheers for the help lads.