Bling section what's mods have you made to your two wheels

Which mods have made to your bike and why?

Who did the work ! And where!

What mods will be on your wish list next

Just for shits am giggles

 

Blimey it would be easier to ask what i havnt done :rofl:

here goes

Preditor exhaust system
bigger inlet rubbers (allows more air flow)
K&N filter
4 degree ingnition advancer (smooths out the mid range)
Iridium plugs
Blue vison headlight bulbs
bigger bar risers (more comfort)
Venhill braided lines all round
hagon progresive fork springs
Hagon rear shocks (both have improved the handling)
R&G crash bobbins
cutom made stantion tubes (makes the front end look beefy)
custom made side panel plates (hides the nasty black plastic ones)
custom covers for the alternator,bottom crank,clutch and brake reservoirs
polished swing arm
polished fork bottoms
polished grab rail
polished wheel rims
polished top yolk
polished headlight brackets
polished rocker cover
polished starter motor cover
polished oil filter cover
polished sprocket cover
stainless steel radiator cover
I am just in the process of having the clutch and timing covers modfied so the centers are windowed

just remembered all stock bolts replaced with Stainless steel taper head bolts

 

Scottoiler, Piryamid hugger Put S/S headers on and a Scorpion can, got a K+N air filter, just waiting to see what the verdict from Pete is regarding an ecu. he's trying out the Seaton Inteceptor module this weekend at Brands BSB. We spent a bit of time on the dyno on Thursday night, he was getting 126 brake from a standard R6 but the rear tyre was sapping a lot of power,...... but if thats no good then it will be the PC III also Wouldn't mind getting a DB screen.


Wish list.......
I am toying with the idea over this winter to build a bigger engine :evil: Wouldnt mind a re-bore to 650-750cc scoreing some HRC Cams, pistons, valves, crank and injectors then throwing it into the frame.

 

Carbon fibre fairing
R&G crash bungs
Magnesium marchesini wheels
Ohlins steering damper with harris mounting kit
ZX10R swing arm
ZX10R rear shock
ZX10R rear caliper
Braking rear disc
4 pot nissin front calipers
Stainless lines
I am building a long stroke, big bore engine [836cc] to replace the one that went bang at oulton
Ignition advacer
Kit race cams with adjustable pullys
Factory pro jet kit
K&N filter
Emmisions crap thrown in the bin
Stainless downpipes with titanium can
ZX10R throttle
Renthel grips
HRC rear brake reservoir kit
Rear seat cover
LED mirrors

Other than that its standard officer :whistle:

 

On the zxr400,

4-2-1 Full race exhaust system
MTC stubby can with removable baffle
100% Braided Lines
K & N Filter
Colour matched grips with ZXR on them
Custom paint job
Custom Seat Coverings
Double Bubble Race Screen
R+G Bungs
R+G Bobbins
Alarmed
Tail Tidy
New Chain and Sprockets about 6 months ago
Just had a Head Gasket replaced and head skimmed, exhaust cam swapped, valves and shims done, carbs balanced
Forks rebuilt 2 weeks ago
New fork seals and new fork oil
New headstock bearings
Overhauled the loom last weekend
Petrol cap rubbers replaced
Rad sensor replaced

 

Few bob been spent already keep em coming chaps :clap:

 

HRC hugger, thats it.

 

blue levers
k and n filter
t.r.e
rizla paint
powder coated yellow wheels
undertray with led rear light
mini indercaters
gold d.i.d xring chain
talon rear sprocket
pro bolt fairing,screen,fuel cap,sprocket bolts
power commander
very loud urban can(but thinking about changing back to my cut down blue flame)
cobra brake lines

 

I had a monkey...:cry:


oh and a screw in the exhaust.

 

KTM handguards
Heated Grips
Zumo 500
Autocom
High screen w/spoiler
:icecream:
to do:
IPod mount
Crash bars
HID headlight
scott oiler
maybe an exhaust, not decided on that :whistle:

 

Done:

Heated grips
MTC Exhaust
Scotoiler
Bellypan
Single Seat cowl (scratches the seat cowl so it isnt on at the mo)
Progressive springs in forks
Screen
Integrated tail light and indicators
Cut down undertray as cheap tail tidy
New radiator (does crash damage fixes count? it is an after market one. )
Home made rad cover which did have NWB on it till it went rusty.
Blue short levers

Wanted:
New shock on the back

Would also love a custom paint job as well. A hornet from above right down the spine of the bike with wings folded down the sides. Shame it would be uber expensive and covered in crap and dirt after a week of my ownership.

 

Stubby race cans made by SP Engineering. Nowt else.

 

Fabbri double bubble screen
R&G crash bungs and swingarm cotton reels
Scottoiler
CCC stubbied oval zorst
GSXR750 front end/wheel/brakes
HEL stainless lines
TPS adjustment (to smooth out low speed power delivery)
Gixer rear shock
Anglesey International GP circuit custom tarmac rash (rhs fairing only)

To do (end of this month)...
Tail tidy
Mini hugger
Pazzo levers

 

All mechanical work & setting up done up to now (apart from tank pad! lol)

To be done in the near future are R&G bungs instead of the solid peices of turd that ive got on there atm, and also pazzo levers.

 

power commander Does'nt count when its fooked :haha:

 

is that coz ya seen mine work a treat?

 

Yeah mate, i can see how stooopid mine look compared

 

De cat pipe
50mm straight through Termi's
Open air box
Cams dialled
Race ECU and map
Extra set of wheels for wets
Removed front light, rear light and indicators
Carbon rear race fairing
Carbon front race fairing
R&G Aero bungs
Carbon heal guards
Carbon hugger
Carbon front mud guard
New black tank
Lock wired sprocket nuts
Lock wired rear wheel nut

Planned
Lock wire everything else
R&G fork and rear bungs
Carbon belly
Stiffer front springs
re shim rear shock
Bigger Brembo master
Slipper
Ti rods
Thicker disks on spare wheels
SPS cams
Rear sets

 

Clutch and timing covers are done what do you think,I painted the inside of the timing cover to match the Barnet

 

arent yours just jam jar lids superglued on? :lol: