Angle grinder

Has anyone local to south manchester (Wythenshawe area) got an angle grinder i could borrow for a couple of hours this week?

 

probably thousands of people, don't know how many of them are on here though:whistle:

 

Argh, Bastard! Haha :finger:

 

who, me? :angel:

 

As small as possible really, could probably do it with 4.5"
Its to remove the heads off a couple of security screws on my old ignition barrel.

 

shear heads or torx with pip in the middle?

 

Shear heads

 

If i don't find anyone closer i will do Lee, cheers for the offer! :thumbsup:

 

left handed drill bit.

 

Just looked that up, might give that a try, cheers :thumbsup:

 

don't tell me you thought i was taking the piss

 

I remember the whole smudger affair with the left handed drill bit all too clearly for that :whistle:

 

I've got a 110v 4-1/2" and transformer. If your going to grind them off you would have better control with a dremmel. Oh I'm in Northwich by the way.

 

I knew that i hadnt thought it up! Thats the tool i was looking for! Cheers.

 

i got mine out with a hammer and punch.

 

pete i have a extracter kit minus the drill bits fook knows were they gone but your welcome to pick it up and borrow just need your own drill bits to start the hole off

 

Cheers for the offer bud, but i think i'm going for the dremel option, its a tool i'll use a fair bit! :thumbsup:

 

If you come over wigan I can let you have a black and decker version with a few bits an pieces. If you want it it's good and usable but surplus to my requirements got a couple of dreamless and a lot of air powered stuff so don't need it